Choosing the material for finishing the facades of privatehouses, it is necessary to prefer such coatings that not only adorn the walls, but also serve practical purposes. This is due to the fact that through the decorative coating there is an opportunity to improve the performance of the building. If there is a need to insulate the building, it is possible to apply plaster with the appropriate qualities. It will impart heat-insulation characteristics to walls and a ventilated facade, based on, for example, block house.
Finishing of the facade siding today is veryis widespread. Work on the installation of this material should begin with the installation of the crate system. It can be based on wooden bars or steel profiles. The first option will be cheaper. Elements of the frame should be filled on the wall in 50 cm increments. It is preferable to use the integral components of the crate, which will guarantee the strength. This technology is used when there is a need to make the walls warm, but the material can be installed directly on the surface.
Facade decoration with siding begins with fasteningstarting bar on the perimeter of the building. Control the correctness of its installation should be through the building level. Before fixing the finishing material to the vertically placed pillars, it is necessary to fix the profile corner.
After the panel is installed, and itslock - click into place, you can screw the screw into the perforated edge of the product. One fastener is required for one rack frame. Only after that, you can install the next panel, making it fix on the same technology. Finish the work by using the method of joining the canvas with each other by means of a connecting strip. This element will hide the joints.
In order to install the siding, you do not need to acquire any sophisticated tools, you will only need:
Artificial decorative stone is excellentlooks like a finish, but it requires compliance with certain rules when carrying out work. Thus, there should be no unevenness on the wall, and the differences do not exceed 2 cm per 1 m2. The surface must have high strength, itDo not deform or be in the shrinkage phase. The wall must be cleaned of the traces of the old finish. It is recommended to get rid of paint stains and oil marks.
If you decide to choose the material described forfinishing facades of private houses, it is worth considering that it will be easier to work with a stone surface. Such a foundation hardly needs preparation. But if the concrete is highly porous, then it must be treated with a primer. In advance such a wall should be cleaned to eliminate irregularities. If the external surfaces are covered with plaster, then before laying the stone, it is necessary to wait until the composition will not gain strength. This will take about a month. If you work with a smooth surface, then it needs to be notched.
The stone can be cut if necessary. Use at the same time you need a Bulgarian. Adhesive composition can be special or prepared from cement and sand. Masterkom it is necessary to put a mixture on the reverse surface of the lining element and distribute the solution. After the stone is required to press against the wall, so that the composition is somewhat made. From surplus glue should be disposed of.
After the artificial decorative stonewas fully reinforced, it is possible to begin the seaming process. To do this, you need to buy a special solution and put it in a package, one of the corners of which is to be cut off. This device will accurately apply the composition between the products. The mixture should not be on the front surface of the finish. After the compound is slightly clamped, it can be smoothed by means of a special steel or plastic spatula. Such a stone for decoration of the facade looks very presentable and allows you to extend the life of materials at the base of the building.
For finishing the external surface of the walls of buildings andThe buildings today are panels that can be made of all kinds of materials. In order to choose which option is best for you, it is worth considering all the features of such a finish.
Steel panels for finishing the facade, as a rule,are mounted on the guides. They perfectly protect the surface, but are not capable of retaining heat. However, this problem can be solved by installing a heater in the groove formed between the wall and the crate. Another disadvantage is that the price increases due to the presence of the system of the crate, the elements of which have to be purchased in addition to the finishing material.
Considering the options for finishing the facade, you canprefer wooden panels. They are excellent at keeping the heat accumulated inside the building, but they do not differ in fire safety. Moisture is also not very beneficial for them, under its influence, the panels can swell, and after that they can crack.
The most common material for decorationfacades of private houses - PVC panels. Externally, they can be performed in imitation of different natural textures. Installing such panels is simple enough, because they have a lock connection.
Tile for finishing facades attached to the wallsquality of resistance to abrasion. Initially, we have to prepare the surface. For this, it needs to be leveled and strengthened. Do not start work on an excessively smooth surface. On it, you need to make notches that will provide the best quality grip. Apply the adhesive composition with a spatula with teeth. Depending on the size of the tiles, you should choose a spatula with the appropriate tooth sizes.
In order to ensure the smoothness of the arrangementclinker elements, it is necessary to make markings on the wall. Use a pencil or marker as well as a cord or thread. The correct location of the tiles to be controlled and during the work. To do this, you need to apply the level. It is important to observe the uniformity of the joints. At the final stage, the application of the trowelling mixture should be carried out using a rubber spatula.
Another fairly common material forfinishing the facades of private houses - decorative plaster, before the application which will prepare the walls. At roughnesses from them it is recommended to get rid, after a surface it is processed by a paint-first coat. After about 6 hours, you can start work on applying plaster.
To do this, prepare a grater or spatula,Drill with a nozzle in the form of a mixer and a container. Initially, the mixture itself is prepared. Do not shut up a large volume at once, because if you do not have time to work out the material, it will lose its properties. Apply a spatula mixture needs a layer that will not exceed the size of the fraction of the composition. Cover small areas that do not exceed 1-1.5 m in area2. If you intend to structure a surface, then similar work can begin at the next stage.
Whichever material you choose for the facade, you should ask what qualities it possesses, whether it will be able to withstand the external influences inherent in your region.
</ p>>
