How to change the light bulb for your room

Every modern car has a functionhighlighting numbers. This is necessary in order to read and easily distinguish your license plate in the dark. Usually the bulb of illumination of number is located in a plafond which is either integrated in a framework of a back number, or in выштамpках an iron of a cover of a luggage carrier. On old cars, this element can be located in the overhead lampshade and to replace the lamp, the lampshade is loosened, and the lamp is replaced. To learn how to change the light bulb numbers on popular cars, read the article to the end.

how to change the backlight bulb

Why change backlight lamps

This fault does not affect thework of the car, but we paid attention to it, because for such a trifle, according to the traffic rules, a fine is imposed. In order to avoid trouble, the driver must know how to change the light bulb of the number lighting with their own hands. Inspector, seeing that you have a defective highlighting of the number, will be only happy to report this. Incidentally, by replacing all the car's backlighting lamps with LEDs, you can save battery power and reduce the load on the mains power supply of the car.

"Lada Priora" - a people's car

"Priora" is a very popular and prestigious modelthe domestic manufacturer "Lada". This car is very common, thanks to low cost and prices for auto parts. Any car owner should know how to change the backlight of the number on the "Prior". In the niche of the back room there are two lamps and you can replace the bulb in them without removing the lamp. By the way, here it is installed on a bulb of type W5W. To quickly and correctly replace a couple of actions. First, open the trunk, and secondly, carefully inspect the area where the license plate is located. After that we find the wires going to each of the fixtures.

How to change the backlight of a number on Prior

Now we will turn the bulb counter-clockwise, remove the cartridge and insert it into the bulb. Reattach the cartridge, turning clockwise.

The second option of replacement is to pull the plafond outward towards yourself, using a flat screwdriver to pull it out. Do this carefully - the plafond can be damaged.

How to change the backlight lighting bulb for this car, we figured out, and on the others?

"Hyundai Solaris" - we master Korean cars

This model of the Korean automaker is notless popular. This foreign car is advantageous and prestigious, and also has a remarkable appearance. If you look at how to replace the lights of the number on the "Solaris", then at first glance it becomes clear that the lighting is implemented on two lamps. It is almost the same with the previous car.

More details on how to change the lights for the number on the "Solaris" are described below.

To access the wiring located on thethe trunk lid, you need to dismantle the lining in the right place, namely on the side where the license plate is located. In order to do this, you must use a wide screwdriver or metal ruler, inserting it into the seam between the iron and the skin, smoothly remove the latches. Do it neatly, do not damage the latches, but if this happens, do not despair, they can easily be found on sale and replaced.

how to change the lights of the room lighting on the solaris

When we see wiring harnesses and cartridges, wewe can repeat the above described actions: turn the cartridge counterclockwise, replace the lamp, install the cartridge back and rotate it clockwise.

We change the lamp on the "Toyota Corolla"

The next car in our review is "Toyota Corolla". How do I change the backlight of a room in a Japanese car?

Toyota Corolla How to Change Lighting Bulbs

As you can already judge by the photo, herenothing complicated. We remove the trim with neat movements. After taking out the faulty bulb, replace it with a new one, be careful that when you disassemble the lamp it does not crack in your hands and you are not injured, and then collect everything in the reverse order.

Outcomes

You learned how to change the backlight bulbon popular cars. Be sure that on other models of cars nothing is difficult and everything is done in the image and likeness of our examples. By the way, eliminating such minor malfunctions by your own hands, you save money, because in car repair shops they take quite a lot of money for such procedures, for several hundred rubles, depending on the region. So why spend money on such trivia, if it is absolutely not difficult even for the most inexperienced driver?

</ p>>
Liked? Share:
Video surveillance system with their own hands:
Alternator for home
Why the light bulb can not be pulled out of the mouth and
Details on how to change the "Warfyce"
How to change the background on a photo: simple
LED lamps with own hands
Backlight in the kitchen: how to draw
Ventilation in your house with your own hands: so
Heated mirrors with his own hands - this is not
Top Posts
up