For fans of night work on a PC: how to make a glowing keyboard and not only!

The question is how to make a glowing keyboard,Occurs when the user works a lot in the dark without lighting. The illumination of the input device solves this problem. There are two ways for this. The first of these is to initially buy such a device. A reliable and simple choice, but for it it is necessary in any case to overpay. Exclusive execution requires additional payment. The second option is to add backlight in the home to the old keyboard. A cheaper solution, but it requires good preparation and small financial injections.

Neon

This is the most difficult way to do it.a luminous keyboard. To implement it, you need neon length of 3 meters and supply voltage of 9V, glue for fixation and a voltage source of 9V. Suitable battery, battery or power supply. Next, we disassemble the peripheral device. In those places where the neon will pass, we bend the lower fixing elements. Then we lay it, at the same time, fixing it with glue every 5 centimeters. To supply power, we make a hole with a drill and drive wires through it. Check the quality of the keys. If necessary, we correct, and then we collect everything. Now, to illuminate the keyboard, it will be enough to supply the neon to the power supply.

LEDs

This method is similar to the one previously described only withthe difference is that here the light source is outside the peripheral device. If you have a computer desk and the keyboard is pulled out, you can stretch the LED strip over the exit. Otherwise, you have to make a self-made stand. And then on it to stretch the light source. Now let's look at how to make a luminous keyboard in this case. And everything is very simple - we stretch the LED tape on the base and fix it with glue every 5 centimeters. Next we connect to the voltage source - and everything is ready. To turn on the LEDs, just toggle the toggle switch.

Phosphor

This is the easiest way to do it.a luminous keyboard. For its implementation, it is enough to buy a paint based on the phosphor and transparent stickers for the keyboard. Next gently cover the keyboard with paint and let it dry. Then paste the stickers and everything is ready.

Ready-made solution

Many manufacturers of computer equipmenttry to make exclusive devices. One of them is SVEN. Its products combine high quality and democratic value. The leading position of this brand is in the segment of peripheral devices. One of them is the SVEN keyboard of the Comfort 7200 EL. It connects to a standard USB interface. All the keys are transparent and backlit. Ideal solution for those who work at night.

Your choice

A glowing keyboard allows the user tospecial problems to work in the dark. Which of the proposed options to choose - a private matter for everyone. The first three options require some preparation. But the device, modernized in this way, and more pleasant, and self-esteem increases. Well, ready solutions are more expensive, but in this case, it makes no sense to puzzle over how to independently make lighting for this class of peripheral device.

</ p>>