Every year many housewives wish to find an effectivedescaling agent for iron. After all, regardless of the cost of the device inside may appear scum, and on the sole - a build-up. During operation, we rarely use distilled water. Water from under the faucet contributes to the appearance of plaque on the internal surface of the device. As a result, the iron works worse, can leave stains on clothes.
Modern models feature functionality,reliability, durability. But, unfortunately, it has not been possible to exclude the formation of scum or sludge to producers. Housewives struggle with such troubles in two ways, such as:
Many women want to buy the latest model, not paying attention to its functionality. But one should adequately assess the planned intensity of the device.
If you use the device as necessary (standard application), you should give preference to the basic models. To supply steam in them, select the desired mode.
If you need to purchase an iron for frequentuse or processing immediately impressive volume of laundry, it is better to pay attention to instruments with a steam generator. Such devices heat up quickly and deliver an intense stream of steam.
Cleaning the device is not an easy process. Therefore, it is better to immediately take care of preventing the appearance of scale in the iron.
Plaque inside the surface can contaminate clothingduring ironing. The spots of a yellowish shade can spoil the appearance of your favorite and expensive things. Many believe that such irons can no longer be used, and they acquire new ones. Do not rush, because there are many methods and means of scale for iron.
Responsible manufacturers take care of theirbuyers. Many new models can be cleaned without the means of scale for iron. They provide a special self-cleaning function, which occurs when performing several stages:
The inner surface of the iron is cleaned of plaqueand dirt due to intensive separation of steam from the holes of the sole. After draining all the water on the bottom of the pelvis, you can see the dirt that accumulated inside the device.
For a more effective cleaning, it is recommended that the iron be shaken slightly during draining. After cleaning, the iron should be washed several times with running water and wipe the device dry.
It is strictly forbidden to use the iron immediately after cleaning. After all, it can get warm to an unacceptably high temperature.
Often the instructions do not warn about this, butbecause a very heated device can ruin not only clothes, but also an ironing board. Do not touch the work surface during cleaning.
A modern range of products for carehousehold appliances are quite wide. Among them, you can find a lot of special means of scale for iron. They are used in the event that the device does not have a self-cleaning system. Such means are especially popular:
"Topperr" is a special anti-scale agent forIron, which actively acts on the structure of calcareous deposits due to high concentration. For the preparation of a cleaning agent, it is necessary to take 2 parts of water and 1 part of the substance. The solution should be poured into the iron. The device must be heated in a vertical position and put it on the sole, disconnecting from the mains. In this condition, the iron should be left for 2 hours. After the solution is drained, the container is washed well and filled with water. The appliance is heated and supplied with steam, thus cleaning the sole from the scale. To remove the remnants of lime, you should iron some unnecessary tissue.
"Antinakipin" is a special cleaning agentiron from scaling. The substance must be diluted with water in the proportion specified in the instructions. The solution is poured into the iron container and the device is connected to the mains. In such condition the iron should be 30 minutes. After cooling, rinse well with clean water.
Greenfield - special chemical pencilactions. It is used to clean the ironing surface of the deposit and the holes from the lime scale. In this case, it is necessary to heat the iron to the temperature of ironing the wool (more than 1000). On the sole should be carefully applied a pencil. After a few minutes, the surface can be wiped with a cotton or linen cloth. After cooling, the ironing surface should be washed with water. The disadvantage of this tool for cleaning the iron from scale is an unpleasant strong odor. Therefore, it is necessary to open all windows and ventilate the room well. After breathing in such a smell in a closed room, you can feel dizzy.
Top House. To clean the container of scale, mix 50 ml of detergent and 100 ml of water. The solution is poured into the iron. The device is heated in the "cotton" mode in the vertical state. After heating, it is necessary to go into steam mode and turn the device horizontally. After waiting 10 minutes, you should drain the solution. Rinse the device in steam mode until particles of contaminants cease to exit from the holes.
There are ways that eachhousewife cope with the scum in the iron at home. We will consider the hot bath method and an effective descaler in the iron - citric acid.
The "hot bath" method involves immersionthe device in hot water. In it, chemical agents for cleaning the iron from scaling inside and outside are dissolved. For this, two racks of wood are placed on the bottom of the tray. They put the device on them. At the bottom of the baking tray pour a descaling agent (you can use both vinegar or citric acid). After pour boiling water into the baking tray in such a way as to almost cover the lower level of the sole completely. Leave the iron for an hour. Then rinse with clean water.
Descaling with citric acidlike self-cleaning process. To do this, we need 25 grams of citric acid, which should be dissolved in a glass of water. The resulting mixture is poured into the apparatus and incorporated into an electric network. After heating, press the steam release button and turn off the iron. So the dissolved citric acid begins to corrode the scum, the holes are cleaned not only from the outside, but also from inside the iron.
Means for cleaning the iron from scaling inside and outside is good. But how to get rid of this problem at all? What can I do to keep scaling inside the device?
The cause of the incrustation is hard water, which contains particles of metals and salts. Therefore, many manufacturers in the instruction indicate that it is necessary to use only pure water.
But is it worth immediately with the purchase of the devicechoose a descaling agent for irons with a steam generator? To date, experts have found the only way out of this situation - a magnetic water converter. The technology and the device of this method is simple. This is a metal tube, which is installed directly on the water pipe. On its inner surface is a magnet, which creates a magnetic field. Thus, salts are not deferred. The water is purified. The cost of such a tube is relatively low. Its installation is simple, it takes about 15 minutes.
Another way to prevent the appearance of scale inside the iron is to use distilled water. This will prolong the normal operation of your device for a long time.
Iron is an indispensable assistant to every mistress. Unfortunately, over time, an incrustation is deposited on its inner surface, which can not only spoil your favorite thing, but also disable the device. To cope with such deposits will help special means of scale for iron, which were described in the article.</ p>>