Among the glutinous compounds on the Russian market, the products of the German company Knauf occupy an important place for the second decade already.
Knauf adhesive solutions are used in construction and repair, including when working with materials such as:
All products are distinguished by reliability, quality,easy to use. And all this is available at a low cost. The consumption of the material is small, which further reduces costs. Thanks to these properties, the company's products are used by professional builders.
Like similar products from other manufacturers, the company's solutions have one drawback. It consists in the impossibility of using mixtures at temperatures below +5 degrees.
All adhesive compositions of the company "Knauf" in the field of application are of four brands:
Composition "Flisencluber" is a dry mix, the main components of which are cement and polymer additives. The main application is the fixation of ceramic tiles.
It is applied on all types of surfaces (concrete, cement, plasterboard, plastered walls and others) indoors and outdoors.
Clay tile "Knauf Flisen" (25 kg) costs from 230 rubles. And this solution will be sufficient for laying tiles on an area of up to 11 square meters (using a spatula with a 6 mm tooth).
The main properties of the adhesive Knauf Flisen after drying are resistance to moisture, high and low temperatures.
It is allowed to use glue "Flisencluber" on surfaces, which are influenced by the following factors:
There are many opinions of users about the tile glue "Knauf Flisen". Reviews are mostly positive. With the material it is easy to work, it dries quickly, the tile keeps well.
Clay tile "Knauf Flisen" is applied onpre-prepared surface. To do this, it is leveled to such an extent that the differences are less than 0.5 cm. It can be done with plasters or with glue itself.
The surface is cleaned, washed, removes dirt and dust. The paint is removed. If you can not do this (for example, waterproof paint) - zashkurivayut. After that, apply a primer. To protect from moisture, a waterproofing solution is used (if water gets on the surface or plaster is applied).
Mix the adhesive solution in a ratio of threeparts of the glue and one part of the water. Leave for 10 minutes. At the end of time, mix well. If the consistency seems unsuitable, add water or a dry glutinous mixture. Stirred.
Further on the prepared surface is appliedthin layer of the resulting solution. And you need to do this in a small area, which can be processed until the solution is seized (10 minutes). For the tile to sit flat, cross stitches are inserted into the seams. After the tiles dry, the crosses are removed. Seams are filled with special compounds (fugues).</ p>>