All about DFID VAZ-2110 (mass air flow sensor)

дмрв ваз 2110
ДМРВ VAZ-2110 (the gauge of the mass expense of air)- this is the most important detail of the car, without which not a single modern injector engine, including the domestic "tens" engine, can do without. Many car owners at least once faced the problem of the ICE. In many cases, the cause is the defective mass air flow sensor. Today we will talk about its design, and also we learn, whether it is possible to repair this detail at breakage.

What is an air sensor?

VAZ-2110 and many other models of the "tenthfamily "have a similar design of the DMRB. Basically, this spare part is a small device that is installed in the nozzle and connects the throttle to the air filter (hence the name - air sensor). Its main function is to control the volume of air that enters the injector motor.

How can I determine if this part is faulty?

The main sign of the mass flow sensor failureAir is an uneven engine operation. At its work the driver feels sharp jumps of turns, wrong dynamics of dispersal and faults at idling. Also, when this part is broken, it's very difficult to start a car: even if on the street plus 30, in the salon the heat and the engine are hot, it's unlikely that you will be able to go somewhere with such a car.

sensor dmrv vase 2110 price
There are also other signs thatindicate that the DFID VAZ-2110 has become unusable, and they can occur even if the car has a normal overclocking dynamics. This can signal a cracked hose that connects the throttle module to the flowmeter. And the last thing that signals a malfunction is the luminous bulb on the instrument panel ("Check engine" or CHECK ENGINE). But such a signal does not give a 100% guarantee that the failure should be sought in the mass air flow sensor. Perhaps the problem lies in the lambda probe or some other detail. Therefore, in any case, the machine must be sent for diagnosis, otherwise the exact cause of the failure you do not determine by the light bulb.

Can it be repaired?

Unfortunately, this part can not be repaired. In case of breakage, it can only be replaced. In addition, VFD-2110 is very vulnerable device: it can be broken even if its surface is often cleaned (especially often when the device is cleaned with cotton).

Resource replacement

Precisely say, through how much to producereplacement of the mass air flow sensor, it is impossible - it can break and after 10 thousand kilometers, and can serve 100 thousand or more. Everything depends on the specific operating conditions and on the quality of the assembly of the part itself.

air sensor vases 2110

DGVV sensor VAZ-2110: price

On average, the cost of a new spare part for the "tens"is about two thousand rubles. But in stores you can see the details with much less value. As a rule, these are sensors without a housing. But to buy them for the sake of economy is not worth it, since such a spare part can soon break down. It is also possible that such a mass air flow sensor simply does not work for your iron friend.

</ p>>
Liked? Share:
How the position sensor interacts
Speed ​​sensor and everything about it
VAZ-2110: replacement of thermostat and thermocouple
Calculation of fuel consumption and the cause of its loss
Coolant temperature sensor WHA
Why do I need a temperature sensor
What is the throttle sensor and how?
VAZ-2114: fuel consumption per 100 km. Causes
VAZ-2110 (injector): does not turn on
Top Posts
up