Every car enthusiast should be ready forall kinds of breakdowns and other unexpected nuances, regardless of the brand, condition and year of release of his car. Take, for example, the situation when you, having gone to nature or found yourself far from home, accidentally lost or broke the ignition key. Such cases, as practice shows, is not uncommon.
So, how to start a car without a key? It would be ideal if there was a multi-tester at hand, but otherwise the usual flashlight bulb would do. The key inserted in the ignition can have three states: this is the on and off power, and also feed it to the starter.
Based on this, it is necessary to find three groupswires. The first ones are those that are powered by a battery, the second ones are given to the car if they are hooked to the first ones, and the third ones to the starter when connected to the first. Usually the second and third groups exist in the form of a single wire, so it will not be too difficult to understand how to start a car without a key.
So, the food is mostly the thickest andbright wire, in some cases there are several. Grounds are usually black or green. If the power is a bundle, then we check each incoming multicast in it, and in the absence of that, we short-circuit it with a minus and check if there are sparks.
Checked? We continue to understand how to start a car without a key. Now all those wires that give a spark, and the minus should be separated. To find the one that feeds the starter, you must put the car on a neutral gear and a handbrake. Next, we check the rest of the wiring by connecting to the power supply until the starter starts working.
Next, to start the car without a key, connectpower and grounding, attaching them with electrical tape. Those wires that feed the starter, we close with the remaining wiring before starting the engine, after which the power needs to be removed.
In case you need to open a car, you can try to make it with a wire hook. It is necessary to find an ordinary wire and bend it into the desired shape at an angle of about 450, the bent part should not be longer than 10 cm. Then push it between the glass and the window seal around the handle, trying to hook the rod with the button and lift it up. This car door opening is ideal for domestic models.
For the second option, a rope or fishing line loop is necessary. But it is only suitable if the button in the door has a protrusion upward.
There is also a variant with a wire hook forimported cars. Hook must be pushed inside the door, hooked and pulling the handle. You can push the wire if you bend the corner of the door with tools or improvised tools.
If the battery is low and thethe alarm can not open the door, you can use the lock cable in the hood, catching it with something and pulling it sharply. If possible, you can connect the power using another battery, by coupling the wires to the car's mass and the starter.
And, of course, the simplest way is to break the glass, if weather permits it.
Now, knowing how to start a car without a key and how to open a door is not so terrible to get into such unpleasant situations.
</ p>>
